Product Description
Master locksmith Steven Hampton reveals here the tricks and tools for bypassing keyed and combination locks from pin tumbler locks, mushroom and spool pin tumbler locks, wafer tumbler locks, warded locks and disk tumbler locks to tubular cylinder locks, magnetic locks, door locks, padlocks and automobile locks. Find the key to “seeing” into every lock and discovering its simplicity…. More >>

Secrets Of Lock Picking

Product Description
The Visual Guide to Lock Picking has been the definitive guide for learning the art of lock picking. The Third Edition updates all of the illustrations with new, high quality, computer graphics. Over 100 new pages have been added. Inside, you will find interesting material and lock picking how-to for pin tumblers, warded locks, wafer locks, tubular locks, combination padlocks, and lever locks. This acclaimed guide reveals the secrets of the trade and makes lea… More >>

Visual Guide to Lock Picking

The study about key in itself is a whole new subject of research.  Carlsbad Locksmiths deals with mechanical locks and keys that are used to protect homes and institutions. However, there are other kinds of keys which relate to electronics and encryption which are very leniently related to mechanical locks and keys.  Kinds of electronic encryption are associated with electronic locks and most Carlsbad Locksmiths deal with electronic locks. Bitting is one such study of keys. In physical from it forms the part of a key that initiates tumblers in the lock to move and open. These bittings are always converted in the form of numbers. These numbers or integers tell a key maker how to go about designing the key.

There is chart specially made for locksmith and is often termed a s the map of a locksmith. This chart is called bitting code list. Eagle Lock Company, which is one of the most famous and trusted lock and key designers have standardized this bitting code for all Carlsbad Locksmiths for generations to come. Carlsbad Locksmiths and locksmiths all over the world have agreed to these numbers that will determine the depth of a cut or notch in the key. The key maker in the Matrix movie is not a simple man to be shot down after all.  The bitting sequence can however vary according to the style of the locksmith. For example, companies like Best Locking Systems use tip to bow representation while others use the other way around. Again, the number can determine the depth of the cut and it is not compulsory for locksmiths to follow a rule that higher the number deeper the cut. Assa is one such company that uses reverse mechanism.  The lower the digit, deeper is the notch or the cut. These numbers or codes of bitting are helpful while designing new keys in replacement for a lost key.

Locksport is a hobby extensively practiced by Carlsbad Locksmiths. They pick locks because it gives them pleasure and they take up new challenges with higher lock systems.  It is enjoyable to study about locks and keys once a curious person gets a hang of the basics of lock picking. Carlsbad locksmiths is filled with these kinds of lock enthusiast or in other words locksmiths.  The issue of lock picking and the legal rights for lock picking varies in different states.  If you are found to have lock picking tools they are considered to be illegal because any lock picking tool is considered to be as equally dangerous as having a crowbar with you, that is most often used for burglary.

However, some of the states allow you to carry lock picking tools provided that you carry some form of license or a proof of intent regarding your lock picking tool.  Carlsbad Locksmith is always certified by law and license is given to them according to their work in this field.  In the state of California possession of lock picking tools by a layman may not be condemned as criminal act.

un piccolo video su questo fantastico ramo dell’ hobby!

As with any other trade, locksmithing has its own set of unique tools. Looking at them piece by piece should be puzzling, if you do not have a background on locksmith service at all. Special tools are used for special purposes just like a carpenter’s hammer is used only for pounding nails into place. Locksmiths have a keen eye for detail as well as skilled and deft hands to pick on the tiny little parts and mechanisms of a lock.

Lock picking is probably the most common task asked by customers from locksmiths, as this is the easiest and most inexpensive method of opening a locked door. Rather than have a locksmith replace your lock, you will always try to have him to open it first without necessarily prying the door. Locksmiths use several tools for this specific purpose as listed below:

Plug Spinners. Plug Spinners are used to lift, rotate and move the plug so that it goes back to its natural unlocked state. Handling this instrument requires a locksmith to have prior knowledge of the accurate positioning of the lock components. Computerized Picks. Computerized picks are used by locksmiths for more complicated lock types such as combination systems. This instrument is made of steel and is capable of configuring up to 6 pins and disc patterns. Tension Wrenches. The tension wrenches are used to control and apply the exact amount of turning pressure needed to access the shear line. Locksmiths usually carry 3 types of torsion wrenches: light, medium and rigid. Key Extractors. These tools are used by locksmiths to remove broken keys, key parts and other foreign material that are wedged into the lock cylinders. Electric Pick Guns. Electric pick guns are essentially small drills powered by electricity. The picks can be replaced, just like any other regular electric drill. A locksmith will typically have an array of picks in different small sizes.

These five tools cover the basic gadgets for lock picking. There are more tools used by locksmithing for other purposes such as installation and repair. Some of them include router drills, deadbolt installation kits, locksmith hammers and key cutters. The next time you call on your reliable locksmith service, check out what instruments he uses when performing the job. Having fundamental background on the tools of locksmiths will give you a general idea on how the work is done, and if indeed your locksmith is carrying with him the right equipment.

Using the wrong tools might cause more damage than good! If you are doubtful of your locksmith’s tools, you can purchase your own set of lock-picking tools which can be found at practically every hardware store. The next time you call on your locksmith, you can ask him to use your tools instead.  Or perhaps you can try using the tools yourself – who knows, you might have a future career as a highly skilled locksmith! Make a little effort to experiment and find out if you indeed have the natural ability to pick locks.